All simulations

Equilibrium

Three industrial reactions, one Le Chatelier engine: dial temperature, pressure, and concentration to hit your quota - the solver will tell you if your chemistry held.
Get the Teacher Code - Free Already have the code? Go to your dashboard →
Chemistry Grades 10-12 6 roles 49 min 1 class period
Chemistry Grades 10-12 6 roles 49 min 1 class period
Modern industrial chemistry. Four to six rival plant teams compete to hit production quotas under shifting constraints. Every round requires Le Chatelier reasoning - which way will the equilibrium shift, and which lever should we pull?

Each team runs a competing chemical plant trying to hit a production quota under shifting constraints. The teacher picks one of three real industrial scenarios at session start (Contact Process for sulfuric acid, Haber-Bosch for ammonia, or the Sabatier reaction for Mars-colony methane). Each round teams see the reaction, their starting partial pressures, the quota, and a disturbance card that forces a Le Chatelier shift. They adjust temperature, pressure, and added reactant; a built-in equilibrium solver computes the actual yield using a literature-calibrated Kp lookup table.

Get Free Teacher Access Already have access? Go to Dashboard

Class Time

49 minutes

Designed For

1 class period

Roles

6 roles

Class Sizes

Core (4 teams), Full (6 teams)

Learning Objectives

5 objectives

Standards

3 standards aligned

Where This Fits in Your Curriculum

Slot this into the middle of the equilibrium unit - after students have met Le Chatelier's principle and know what K means, before the unit test. They need to be able to say which way a system shifts when you heat it, compress it, or add reactant, and to read a Kp value as large or small. They do not need fluency with ICE tables, and they do not need thermodynamics, Gibbs free energy, or any calculus, because the built-in solver does the arithmetic and reports whether the chemistry held. What it teaches underneath the plant-manager framing is why real industrial conditions look wrong on paper: the Haber compromise, the price of the yield you want, and the gap between thermodynamically favorable and actually feasible. It works for AP Chemistry, honors chemistry, and general chemistry classes running Le Chatelier qualitatively.

What Students Will Learn

Social & Emotional Learning (CASEL)

Aligned to the CASEL framework's core competencies. These are the SEL skills students actively practice while playing.

Flexible Class Sizes

Core (4 teams)
Four plant teams with contrasting cost profiles. Best for 8-20 students (2-5 per team).
Full (6 teams)
Adds two more teams for larger classes. Best for 12-30 students.

How the Game Plays Out

Turn 1: Briefing
Reaction and rules of the plant
"What does our plant do best, and what does it do worst?"
Turn 2: Round 1: Temperature Only
One lever, one decision
"Which way does the equilibrium shift with temperature for THIS reaction?"
Turn 3: Round 2: Temperature + Pressure
Two levers, a tradeoff
"When the disturbance hits one lever, can the other lever compensate?"
Turn 4: Round 3: All Levers + Debrief
Optimize under lever costs, then debrief
"Given everything you have, what is your best play - and why did industry settle on the conditions they did?"

Roles Your Students Will Play

Click any role to see their background and what they are trying to accomplish.

Steady Stream Chemicals
Your plant runs efficient heat exchangers and a top-tier insulation envelope. Heating costs are cheap, but your compressors are an older generation - high pressure is expensive.

Heating cost multiplier: 0.7x. Compression cost multiplier: 1.4x. Reactant addition cost: 1.0x. Reactor volume: standard. Starting capital: 200 units.

Goals
  • Hit each round's quota at the lowest possible compression
  • Use your cheap heating: any temperature costs you less to heat than it costs the other plants
  • Pull strategy toward the temperature lever and away from the pressure lever
PressureWorks Industries
Your plant was rebuilt last year with state-of-the-art high-pressure compressors. Compression is cheap; heating, less so - the new compressors took the maintenance budget that would have gone to your heat-exchanger overhaul.

Heating cost multiplier: 1.4x. Compression cost multiplier: 0.7x. Reactant addition cost: 1.0x. Reactor volume: standard. Starting capital: 200 units.

Goals
  • Push pressure aggressively - your cost advantage is largest at the high end
  • Avoid running hot when you can avoid it
  • Pull strategy toward the pressure lever, especially when Delta-n is large and negative
GreenLine Refining
Your plant is small, modern, and lean. A smaller reactor means less raw material per cycle - which limits your peak yield - but every cost runs at baseline and your reactant feed is the cheapest in the field.

Heating cost multiplier: 1.0x. Compression cost multiplier: 1.0x. Reactant addition cost: 0.5x (HALF). Reactor volume: 0.7x (smaller). Starting capital: 200 units.

Goals
  • Use cheap reactant addition aggressively - that is your unique edge
  • Make up for your small reactor by adding reactant when it unlocks
  • Avoid quota misses in Rounds 2 and 3 - your smaller reactor means smaller overshoots and undershoots both
MegaChem Holdings
The biggest plant on the block. Your reactor is 30% larger than the standard - which means bigger possible yields - but you pay for that scale. Every lever costs you 20% more than baseline.

Heating cost multiplier: 1.2x. Compression cost multiplier: 1.2x. Reactant addition cost: 1.2x. Reactor volume: 1.3x (larger). Starting capital: 200 units.

Goals
  • Use your larger reactor to overshoot quotas where overshoot is cheap (Contact, where K is huge)
  • Pick lever moves precisely - you cannot afford waste
  • Win on yield in rounds where the price premium pays off
Catalyst Specialists Ltd
Your plant uses a proprietary next-gen catalyst with much higher activity per pass. K itself is unchanged (catalysts NEVER change equilibrium position - that's a physical law), but your reactor reaches the thermodynamic equilibrium in less time, so per single batch your conversion is closer to the K-limit. We model this game-mechanically as a 1.5x effective Kp - it is a scoring abstraction for a rate effect, not a real shift in K.

Heating cost multiplier: 1.0x. Compression cost multiplier: 1.0x. Reactant addition cost: 1.0x. Reactor volume: standard. Effective Kp multiplier: 1.5x (rate effect modeled as Kp boost for scoring; real K unchanged). Pressure ceiling: your maximum pressure is ~15% lower than the scenario max (the proprietary reactor head can't safely hold the top of the range). Starting capital: 200 units.

Goals
  • Use the rate edge to reach equilibrium more completely each batch - shows up as a higher effective Kp in our scoring
  • Recognize that the real K is what it is for the temperature you pick - your edge is reaching it faster
  • Do not push to max pressure - your pressure ceiling sits ~15% below the scenario max
Wildcat Process Co
An old-school plant on a shoestring. Your lever costs are FLAT - 50 units for any temperature change, 50 for any pressure change, regardless of magnitude. But your reactor's heat-resistance rating caps you at 720 K - your temperature slider physically does not go higher, no matter the scenario.

Heating cost: FLAT 50 (regardless of T). Compression cost: FLAT 50 (regardless of P). Reactant addition cost: 1.0x. Reactor volume: standard. Temperature ceiling: HARD CAP 720 K (the slider never goes past it). Starting capital: 200 units.

Goals
  • Push hard on EVERY lever - your costs are flat, not scaling
  • Avoid wasted settings: pressure at the top of its slider and temperature at its coolest setting make the most product for your flat cost
  • Find scenarios where the optimum is below 720 K so your ceiling does not matter

Hand Each Student Their Own Sheet

One click on the teacher dashboard prints a dossier for every role - background, goals, key facts, and their confidential briefing - plus the primary-source packet and a vocabulary sheet. Print them, or save as PDF, so each student reads their role on paper instead of huddling around one screen. The app still runs the votes and the action; the paper just carries the reading.

Primary Sources

Every role includes real historical documents. Students read them because they need the information to make their case.

Plant Operations Reference Card

Key Terms Students Will Learn

equilibriumKpKcLe Chatelier's principleICE tableQ (reaction quotient)exothermicendothermicΔH (enthalpy change)Delta-n (delta n)van't Hoff equationcatalystHaber-Bosch processContact ProcessSabatier reactionpartial pressurestoichiometric coefficientkinetics vs thermodynamics

After the Game: Debrief Questions

  1. Which lever was the most powerful for THIS scenario - and why?
  2. Why does real industry not just run at the temperature with the highest K?
  3. What does the catalyst actually do, and what does it NOT do? Your coaching notes may have mentioned it.

Ready to run this in your classroom?

Get free teacher access in 30 seconds. No account needed - just a passcode that unlocks the full game library, teacher guides, and session tools.